Washer Replacement
1 . Disconnect the receiver-dryer line, then remove the receiver-dryer (see Section 22).
2. Remove the bumper, then remove the washer reservoir by removing the 3 mount bolts.
3. Disconnect the hose and the 2-P connectors from the front and rear washer motor.
4. Remove the washer nozzles and washer hose.
(Rear window washer nozzle: Remove the rear spoiler)
NOTE:
• Clamp the hoses with the wire harness in the left front fender.
• Take care not to pinch hoses during reinstallation.
• Install the clips firmly.
• After installation, adjust the washer nozzles.