1. Open the hood and remove the cap nuts and the wiper arms. NOTE: Carefully remove the wiper arms so that they do not touch the hood. 2. Remove the hood seal and air scoop by prying out their trim clips.
3. Disconnect the 5-P connector from the wiper motor, then remove the wiper harness from the wiper linkage. 4. Remove the wiper linkage assembly by removing the 3 mounting bolts.
5. Remove the 3 mounting bolts and 1 nut from the wiper linkage to remove the wiper motor.
6. Install the wiper motor in the reverse order of removal.